--- title: ABIBLOG English | Florian Görlitz description: The biggest and brightest minds of the welding community give insight, advice, and deep dives on welding's most common questions. All to ensure you get the most out of your shop. --- [![](https://blog.binzel-abicor.com/hs-fs/hubfs/Blog/Layout/logo.png?width=170&name=logo.png "logo.png")](https://www.binzel-abicor.com) - [ABICOR BINZEL Global Website](https://www.binzel-abicor.com/) ![more than welding](https://blog.binzel-abicor.com/hubfs/Theme_Abicor_Binzel_2021/logos/more-than-welding.svg) [ABIBLOG English](https://blog.binzel-abicor.com/) # ABIBLOG: ABICOR BINZEL's Welding Blog ## Florian Görlitz ![](https://blog.binzel-abicor.com/hubfs/Communal%20Files/Blog/Blog%20Author%20Headshots/BKG%20Headshots/Goerlitz_Florian_.jpg) ### Recent Posts [![](https://blog.binzel-abicor.com/hubfs/BKG%20(Binzel%20Germany)/Blog/Schwei%C3%9Ftrennmittel%20-%20unschlagbar,%20unbrennbar/Welding_Chemicals_Blog_Banner_AdobeStock_87469315.jpg)](https://blog.binzel-abicor.com/anti-spatter-agents-unbeatable-non-flammable?hsLang=en-us) ## [Anti-spatter agents: unbeatable, (non-)flammable?](https://blog.binzel-abicor.com/anti-spatter-agents-unbeatable-non-flammable?hsLang=en-us) Posted by [Florian Görlitz](https://blog.binzel-abicor.com/author/florian-g%C3%B6rlitz?hsLang=en-us) on Jun 7, 2021, 11:22:40 AM ## Flammable vs. non-flammable anti-spatter sprays Wherever welding takes place, weld spatter also occurs. During MIG welding and MAG welding, spatter formation is particularly high. Although it is possible to reduce the formation of weld spatter in these processes through process optimisation, it can never be avoided completely. Since weld spatter partially sticks, a good preparation is required, because it can be found almost everywhere: on and in the front end of the torch including the gas nozzle, on the contact tip and contact tip holder, on the workpiece as well as on the clamping element, if used. However, by applying a good sprayable anti-splatter agent, which is suitable for all areas, the majority of the welding spatter can be kept away or easily removed. [More](https://blog.binzel-abicor.com/anti-spatter-agents-unbeatable-non-flammable?hsLang=en-us) ![](https://blog.binzel-abicor.com/hubfs/ABICORBINZEL%20-Dec2016/Images/arrow_right.gif) Comments: 0 - [Click here to read/write comments](https://blog.binzel-abicor.com/anti-spatter-agents-unbeatable-non-flammable?hsLang=en-us#comments-listing) Topics: [Welding Chemicals](https://blog.binzel-abicor.com/topic/welding-chemicals?hsLang=en-us) [![](https://blog.binzel-abicor.com/hubfs/BKG%20(Binzel%20Germany)/Blog/Vorteile%20und%20Unterschiede%20nicht%20brennbarer%20Schwei%C3%9Ftrennmittel/Super_Pistolenspray_NF_Vergleich_Flamme_800x300.jpg)](https://blog.binzel-abicor.com/advantages-and-differences-of-non-flammable-anti-spatter-agents?hsLang=en-us) ## [Advantages and differences of non-flammable anti-spatter agents](https://blog.binzel-abicor.com/advantages-and-differences-of-non-flammable-anti-spatter-agents?hsLang=en-us) Posted by [Florian Görlitz](https://blog.binzel-abicor.com/author/florian-g%C3%B6rlitz?hsLang=en-us) on May 4, 2021, 9:03:03 AM Whether it is an anti-spatter spray, a paste or an emulsion: anti-spatter agents for welding are available on the market in many variants - for using on the welding torch, on the work piece or even on both. They all serve the purpose to avoid time-consuming rework by removing weld spatter from the work piece, to reduce downtimes due to frequent wear part changes, and to ensure that tools used in the welding process, such as clamping devices, always remain fully operational. What role does it play whether an anti-spatter agent is flammable or non-flammable? Moreover, are all non-flammable anti-spatter agents equally good? [More](https://blog.binzel-abicor.com/advantages-and-differences-of-non-flammable-anti-spatter-agents?hsLang=en-us) ![](https://blog.binzel-abicor.com/hubfs/ABICORBINZEL%20-Dec2016/Images/arrow_right.gif) Comments: 0 - [Click here to read/write comments](https://blog.binzel-abicor.com/advantages-and-differences-of-non-flammable-anti-spatter-agents?hsLang=en-us#comments-listing) Topics: [Welding Chemicals](https://blog.binzel-abicor.com/topic/welding-chemicals?hsLang=en-us) [![](https://blog.binzel-abicor.com/hubfs/BKG%20(Binzel%20Germany)/Blog/Green_Factory/AdobeStock_297584270_Green_Factory_banner.jpg)](https://blog.binzel-abicor.com/with-abicor-binzel-youre-on-the-way-to-a-green-factory?hsLang=en-us) ## [With ABICOR BINZEL you’re on the way to a Green Factory](https://blog.binzel-abicor.com/with-abicor-binzel-youre-on-the-way-to-a-green-factory?hsLang=en-us) Posted by [Florian Görlitz](https://blog.binzel-abicor.com/author/florian-g%C3%B6rlitz?hsLang=en-us) on Mar 5, 2021, 11:20:46 AM ## EWR 2 gas management system for welding: saves gas right from the start! What makes a company a Green Factory? Everything that has to do with sustainability. Using renewable raw materials, grow organically, use of solar energy, save CO2 ... these are all approaches that can make our world a little better. One or the other can also be implemented in welding technology and fortunately it is becoming increasingly important for companies to do something to protect our environment. The trend is towards becoming a so-called Green Factory. ABICOR BINZEL can support you or your company on the way to the Green Factory. Or expand your status as a Green Factory. [More](https://blog.binzel-abicor.com/with-abicor-binzel-youre-on-the-way-to-a-green-factory?hsLang=en-us) ![](https://blog.binzel-abicor.com/hubfs/ABICORBINZEL%20-Dec2016/Images/arrow_right.gif) Comments: 1 - [Click here to read/write comments](https://blog.binzel-abicor.com/with-abicor-binzel-youre-on-the-way-to-a-green-factory?hsLang=en-us#comments-listing) Topics: [Gas Management](https://blog.binzel-abicor.com/topic/gas-management?hsLang=en-us) [![](https://blog.binzel-abicor.com/hubfs/BKG%20(Binzel%20Germany)/Blog/EWR/EWR_2_banner.jpg)](https://blog.binzel-abicor.com/ewr-2-reduce-shielding-gas-consumption-and-save-money-now?hsLang=en-us) ## [EWR 2: Reduce shielding gas consumption and save money now](https://blog.binzel-abicor.com/ewr-2-reduce-shielding-gas-consumption-and-save-money-now?hsLang=en-us) Posted by [Florian Görlitz](https://blog.binzel-abicor.com/author/florian-g%C3%B6rlitz?hsLang=en-us) on Dec 23, 2020, 4:59:29 AM ## Why shielding gas offers a huge savings potential The valve is opened and there it is: the shielding gas for welding. Depending on the requirements of the welding task, the gas pressure and gas quantity are still set with the manometer before starting. Pre-flow time? Rather a little longer. Better safe, than sorry. The same applies to the post-flow time. Whether this lasts a few seconds longer or not does not seem to make much difference. Or maybe it does? The fact is: the shielding gas consumption is usually much too high. With the gas management system EWR 2 you can save money in gas shielded arc welding. [More](https://blog.binzel-abicor.com/ewr-2-reduce-shielding-gas-consumption-and-save-money-now?hsLang=en-us) ![](https://blog.binzel-abicor.com/hubfs/ABICORBINZEL%20-Dec2016/Images/arrow_right.gif) Comments: 2 - [Click here to read/write comments](https://blog.binzel-abicor.com/ewr-2-reduce-shielding-gas-consumption-and-save-money-now?hsLang=en-us#comments-listing) Topics: [Gas Management](https://blog.binzel-abicor.com/topic/gas-management?hsLang=en-us) [![](https://blog.binzel-abicor.com/hubfs/BKG%20(Binzel%20Germany)/Blog/BTC-20_NF_Action_banner.jpg)](https://blog.binzel-abicor.com/practical-tips-for-welding-3-reasons-for-not-using-water-as-a-coolant-for-welding?hsLang=en-us) ## [Practical tips for welding: 3 reasons for not using water as a coolant for welding](https://blog.binzel-abicor.com/practical-tips-for-welding-3-reasons-for-not-using-water-as-a-coolant-for-welding?hsLang=en-us) Posted by [Florian Görlitz](https://blog.binzel-abicor.com/author/florian-g%C3%B6rlitz?hsLang=en-us) on Nov 3, 2020, 2:32:04 AM What do you actually use to cool your welding torch? Is water from the regular piping system running through the cooling system of your power source or have you filled in coolant? And do you often have to cope with torch failures? If this is the case, the choice of your coolant could provide information about the reason for the frequent torch failures. In fact, water is often used as a coolant during welding. Why this is not a good idea at all, and why it can even cause torch failures, is explained in this blog. [More](https://blog.binzel-abicor.com/practical-tips-for-welding-3-reasons-for-not-using-water-as-a-coolant-for-welding?hsLang=en-us) ![](https://blog.binzel-abicor.com/hubfs/ABICORBINZEL%20-Dec2016/Images/arrow_right.gif) Comments: 3 - [Click here to read/write comments](https://blog.binzel-abicor.com/practical-tips-for-welding-3-reasons-for-not-using-water-as-a-coolant-for-welding?hsLang=en-us#comments-listing) [![](https://blog.binzel-abicor.com/hubfs/BKG%20(Binzel%20Germany)/Blog/Praxis_Tipps_Schwei%C3%9Fchemie/ABIBLUE_Action_Header_.jpg)](https://blog.binzel-abicor.com/practical-tips-for-welding-how-to-remove-and-prevent-weld-spatter?hsLang=en-us) ## [Practical tips for welding: How to remove and prevent weld spatter](https://blog.binzel-abicor.com/practical-tips-for-welding-how-to-remove-and-prevent-weld-spatter?hsLang=en-us) Posted by [Florian Görlitz](https://blog.binzel-abicor.com/author/florian-g%C3%B6rlitz?hsLang=en-us) on Sep 14, 2020, 11:41:21 AM ## Anti-spatter spray, anti-spatter liquids, anti-spatter fluid and more You have to break an egg to make an omelet. Especially with [MIG](https://www.binzel-abicor.com/DE/eng/solutions/process/mig-gmaw/)/[MAG](https://www.binzel-abicor.com/DE/eng/solutions/process/mag-gmaw/) welding, weld spatter occurs, which can already be heard from afar. With this »crackling and cracking« small metal droplets are created that are hurled from the weld pool or from the hot liquid electrode end to the workpiece surface or land on the weld seam and the torch wear parts. Excessive weld spatter is caused, for example, by an incorrectly set welding current, a non-optimal arc, incorrect polarity or insufficient gas shielding. However weld spatter occurs ... burnt weld spatter has to be removed again. This rework costs time and money. Anyone who welds wants to keep the adhesion of weld spatter as low as possible. And if they do stick, they can easily be removed again. Here we answer the questions that our field staff are asked the most on site. [More](https://blog.binzel-abicor.com/practical-tips-for-welding-how-to-remove-and-prevent-weld-spatter?hsLang=en-us) ![](https://blog.binzel-abicor.com/hubfs/ABICORBINZEL%20-Dec2016/Images/arrow_right.gif) Comments: 1 - [Click here to read/write comments](https://blog.binzel-abicor.com/practical-tips-for-welding-how-to-remove-and-prevent-weld-spatter?hsLang=en-us#comments-listing) [All posts](https://blog.binzel-abicor.com/all?hsLang=en-us) - [Robotic Welding (18)](https://blog.binzel-abicor.com/topic/robotic-welding?hsLang=en-us) - [Fume Extraction (15)](https://blog.binzel-abicor.com/topic/fume-extraction?hsLang=en-us) - [Gas Management (5)](https://blog.binzel-abicor.com/topic/gas-management?hsLang=en-us) - [MIG Guns & Torches (5)](https://blog.binzel-abicor.com/topic/mig-guns-torches?hsLang=en-us) - [Welding Chemicals (4)](https://blog.binzel-abicor.com/topic/welding-chemicals?hsLang=en-us) - [Health & Safety (3)](https://blog.binzel-abicor.com/topic/health-safety?hsLang=en-us) - [TIG Torches (3)](https://blog.binzel-abicor.com/topic/tig-torches?hsLang=en-us) - [Aluminum Welding (2)](https://blog.binzel-abicor.com/topic/aluminum-welding?hsLang=en-us) - [MIG/MAG (2)](https://blog.binzel-abicor.com/topic/mig-mag?hsLang=en-us) - [TIG (2)](https://blog.binzel-abicor.com/topic/tig?hsLang=en-us) - [Automation (1)](https://blog.binzel-abicor.com/topic/automation?hsLang=en-us) - [Automation Welding (1)](https://blog.binzel-abicor.com/topic/automation-welding?hsLang=en-us) - [Cobot (1)](https://blog.binzel-abicor.com/topic/cobot?hsLang=en-us) - [Plasma Welding (1)](https://blog.binzel-abicor.com/topic/plasma-welding?hsLang=en-us) - [Seam Tracking (1)](https://blog.binzel-abicor.com/topic/seam-tracking?hsLang=en-us) - [Shielding Gas (1)](https://blog.binzel-abicor.com/topic/shielding-gas?hsLang=en-us) - [Welding Consumables (1)](https://blog.binzel-abicor.com/topic/welding-consumables?hsLang=en-us) - [Welding Safety (1)](https://blog.binzel-abicor.com/topic/welding-safety?hsLang=en-us) - [cobots (1)](https://blog.binzel-abicor.com/topic/cobots?hsLang=en-us) - [manual welding (1)](https://blog.binzel-abicor.com/topic/manual-welding?hsLang=en-us) ### Subscribe to our blog And receive notifications about the latest blog articles once a month directly by email! - [English Blog](https://blog.binzel-abicor.com) - [German Blog](https://blog.binzel-abicor.com/de) - [Portuguese Blog](https://blog.binzel-abicor.com/pt) - [Spanish Blog](https://blog.binzel-abicor.com/es) © 2021 ABICOR BINZEL ABIBLOG [English](https://blog.binzel-abicor.com/) | [German](https://blog.binzel-abicor.com/de/?hsLang=en-us) | [Portuguese](https://blog.binzel-abicor.com/pt/?hsLang=en-us) | [Spanish](https://blog.binzel-abicor.com/es/?hsLang=en-us) | [USA (English)](https://blog.binzel-abicor.com/USA/?hsLang=en-us)